Best EssaysLong reads and ideas worth your time
Technology

What is a modular home? How Australia learned to build houses in a factory

A modular home is built in sections in a factory, then trucked to site and joined. How it works, how it differs from prefab and kit homes, and its Australian history.

By Editorial team · · 8 min read

Ask most Australians to picture a house being built and they’ll imagine a slab, a timber frame going up in the rain, and a crew of trades taking turns on site for the better part of a year. A modular home flips that picture around. Most of the building happens indoors, in a factory, and the finished sections arrive on the back of a truck. On site, the work that remains is mostly joining things up.

The idea sounds modern, and the technology around it certainly is. But Australians have been living in houses made somewhere else for almost as long as there have been colonial houses at all. Understanding what a modular home is means looking at both: how the method works today, and why it has drifted in and out of fashion for nearly two centuries.

The short answer

A modular home is a house built as a set of three-dimensional sections, or “modules”, in a factory. Each module is a complete box of building: floor, walls, ceiling, and usually the windows, wiring, plumbing, cabinetry and internal finishes too. The modules are transported to the site, lifted onto prepared foundations, usually by crane, and connected to each other and to services such as water, sewerage and power.

The important point is that a modular home is not a different kind of house in law. In Australia it has to meet the same National Construction Code requirements as any other dwelling, including structural, fire, energy-efficiency and waterproofing provisions, and it needs the same building permit. The Australian Building Codes Board has published a handbook on prefabricated, modular and offsite construction that explains how these buildings demonstrate compliance. What changes is where and how the building is put together, not the standard it has to reach.

Modular, prefab, transportable, kit: untangling the words

Part of the confusion around modular homes is that the vocabulary overlaps, and people (including some sellers) use the terms loosely. Broadly:

Prefabricated or “prefab” is the umbrella term. It covers any building where significant parts are made away from the final site. Under that umbrella sit several distinct approaches.

Panelised construction delivers flat wall, floor and roof panels made in a factory, which are then assembled on site. Prefabricated timber wall frames and roof trusses, now used in a large share of conventional Australian houses, are a modest version of the same idea.

Modular or “volumetric” construction goes further, shipping finished three-dimensional rooms rather than flat parts. A typical modular house might be made of two to six modules, joined along their long sides.

Transportable homes are usually built as a single unit, or a very small number of large units, and delivered more or less complete. In everyday Australian usage “transportable” often describes a smaller home, granny flat or cabin that can be moved on a truck in one piece. The line between modular and transportable is blurry, and many builders use both words.

Kit homes are different again. A kit is a package of pre-cut and sometimes pre-assembled materials, with plans, that an owner-builder or local builder puts together on site. Much of the labour still happens on the block.

Relocatable or “demountable” buildings are designed to be moved repeatedly. The portable classrooms many Australians remember from school, and the accommodation blocks of mining camps, belong to this family.

A surprisingly old idea in Australia

Prefabrication arrived with the colonists. In the 1830s a London carpenter named Henry Manning designed what he advertised as a “portable colonial cottage”: a timber house made of standardised panels and posts that could be shipped to the colonies and bolted together by people with few building skills. Settlers arriving in a place without sawmills, kilns or many tradespeople had good reasons to bring their houses with them.

Melbourne still has examples. The small cottage that Charles La Trobe, the colony’s first superintendent, brought with him from England and erected in 1839 survives today as La Trobe’s Cottage in the Kings Domain. During the gold rush of the 1850s, when the population exploded and labour was scarce and expensive, iron houses were shipped out from Britain in kit form. A group of these survive in South Melbourne, managed by the National Trust.

The next great wave came after the Second World War. Australia faced a severe housing shortage, building materials were rationed and skilled labour was scarce, while factories built for the war effort were looking for new work. Governments experimented widely. In Victoria the Housing Commission set up a factory to produce precast concrete houses, and steel “Beaufort” houses were designed using know-how from wartime aircraft manufacturing. Thousands of prefabricated houses were also imported from Britain and Europe. Many of these post-war prefabs are still lived in, which says something about how well some of them were built.

Then the enthusiasm faded. As materials and labour became easier to find, conventional brick-veneer and weatherboard building on site became cheap and familiar, and prefabrication was left with an image problem: temporary, cheap, a bit second-rate. That image has proved hard to shake.

How a modular home is actually built

The modern process tends to run in two parallel tracks, which is the main source of its speed.

While the modules are built in the factory, the site is prepared: soil testing, permits, foundations (slabs, stumps or screw piles depending on the ground) and connections for services. On a conventional build these steps happen one after another; with modular construction much of the site work overlaps with the house being built.

Inside the factory, a module moves through stations much like a car on a production line, though at a far slower pace. Floors are framed, walls go up, wiring and plumbing are installed, linings and finishes go on, and inspections happen along the way. Working indoors means no rain delays and no materials left out in the weather. Factories can also cut materials more precisely and reuse offcuts, which is why prefabrication is often credited with producing less construction waste.

Delivery is the dramatic part. Modules are moved by road as oversize loads, which means road rules, permits and sometimes escorts and route planning. Their maximum width and height are often set as much by what fits on Australian roads and under bridges as by architecture. On site, a crane lifts each module into place, crews join them, and the remaining work, such as connecting services, adding decks or verandahs and finishing the joins, is done in days or weeks rather than months.

Some builders take this further and deliver homes that are almost entirely complete. In Victoria, for example, Todd Devine Homes builds transportable homes at a dedicated construction facility in Lang Lang, south-east of Melbourne, and then trucks them to properties around the state. It’s one example of a manufacturer that has organised itself around the factory model rather than treating prefabrication as a sideline.

The advantages

Time. Because the site work and the factory build run in parallel, and the factory isn’t stopped by weather, the construction phase can be shorter than on a comparable site-built home. Planning, design and approvals still take as long as they take, so the overall saving depends heavily on the project.

Quality control. Repeating the same tasks in the same place, with the same team and equipment, makes it easier to check work consistently. Defects still happen, but the conditions favour consistency.

Less disruption on site. For a backyard home or a holiday park, having most of the noise, mess and trade traffic happen somewhere else is a real benefit to neighbours and residents.

Predictability. Many modular builders work from a range of established designs, which makes it easier to know what you are getting and roughly what it will cost before construction begins.

The trade-offs

Transport and access. If a truck and crane can’t reach the site, or the route involves narrow roads, steep driveways or low bridges, a modular home may be difficult or expensive to deliver.

Design limits. Modules have to be strong enough to be lifted and moved, and narrow enough to travel by road. That shapes the floor plan. Very large open spaces, complicated rooflines and steep sloping sites are possible but harder.

Finance. Banks are used to construction loans that pay out in stages as a house rises on land the borrower already owns. A home built in a factory doesn’t fit that pattern neatly, because much of the value exists somewhere other than the borrower’s block until delivery. Lenders have been adapting, but anyone considering a modular or transportable build should ask early how the loan will be structured.

Perception. The post-war reputation lingers. Some buyers, valuers and neighbours still assume a factory-built house is temporary or inferior, whatever the actual specification.

Why modular homes are back in the conversation

Prefabrication has always surged when housing is short and conventional building struggles to keep up. That is the situation Australia finds itself in now. National housing targets are ambitious, trades are in demand, and construction costs have risen sharply. Building ministers have explicitly pointed to modern methods of construction, including modular homes, as one way to lift supply, and industry estimates suggest offsite construction still accounts for only a small share of new Australian homes, leaving plenty of room to grow.

Planning changes are helping too. Victoria, for instance, made it much simpler to add a small second home to an existing lot, removing the need for a planning permit in many cases. The limit was originally 60 square metres and was raised to 80 square metres in October 2026, though a building permit is still required and conditions apply, as the Victorian planning department explains. Compact homes of that size are exactly the kind of building that suits factory production and a single delivery on a truck.

So, is a modular home a “real” house?

In every sense that matters, yes. It must meet the same building code, it sits on permanent foundations, it is connected to the same services, and many are indistinguishable from their site-built neighbours once the verandah is on and the garden has grown in. What makes a home modular is a manufacturing decision about where most of the building happens.

The more interesting question may be why it took Australia so long to come back to the idea. From Henry Manning’s portable cottages to the concrete houses of post-war Melbourne, building houses in a factory has repeatedly been the answer when the country needed homes quickly. It may be about to have its moment again.

Best Essays is an independent publication. Essays are researched and edited by our editorial team; see our editorial policy. Spotted an error? Email info@bestessays.com.au.